What HVAC Energy-Efficiency Ratings Mean

Are you comparing the efficiency ratings of new heating and cooling systems? Or are you interested in knowing the rating on your existing HVAC system. Either way, you can find the efficiency rating and projected annual operating costs by checking the yellow Energy Guide label around the side of the unit. Here’s more information about the various ratings you might see and what they mean. 

What Is a SEER Rating? 

SEER is an acronym for Seasonal Energy Efficiency Ratio, a measurement of air conditioning efficiency. The SEER rating signifies the cooling output of an air conditioning unit over an entire cooling season, divided by the volume of energy consumed during that period. A higher SEER rating indicates better energy efficiency and lower energy bills. 

Today, the minimum SEER rating for new air conditioners is 14 SEER in the northern U.S. and 15 SEER in the southern U.S. This is an increase from the past minimum requirement of 13 SEER in the north and 14 SEER in the south, which was in effect from 2015 to 2022. This change reflects the U.S. Department of Energy’s (DOE) ongoing efforts to reduce energy consumption and greenhouse gas emissions. 

Lately, high-end air conditioners boast ratings of 26 SEER or higher, providing amazing energy savings. However, exceptional SEER ratings usually come with a higher up-front cost. This means you should consider both the initial investment and the potential for continued savings when choosing a new air conditioner. 

What Is an EER Rating? 

While SEER ratings are more known to consumers, cooling systems have a different efficiency metric you should know about. It’s called EER, and it is short for Energy Efficiency Ratio. This conveys the performance of an air conditioner under specified operating conditions. The EER rating helps you understand if the system will keep up with demand on the hottest summer days. 

Currently, only the southwest region has a minimum EER rating of 12.2 EER for residential central air conditioners. Peak ratings top out at about 14 EER. In most cases SEER and EER typically correspond, with higher ratings indicating greater overall performance. 

What Is an HSPF Rating? 

Heating Seasonal Performance Factor (HSPF) ratings are measurements of the energy efficiency of air-source heat pumps when in heating mode. HSPF is a proportion of the total heat output in British Thermal Units (BTUs) during the heating season to the amount of electricity used in watt-hours. A higher HSPF rating means a more efficient heat pump. 

The minimum HSPF rating for new heat pumps is 8.8 HSPF, an increase from the previous minimum of 8.2 HSPF. By requiring higher minimum HSPF ratings, the DOE hopes to encourage the use of more energy-efficient heating systems in homes and businesses throughout the U.S. You can always settle for the minimum, but it’s a wise choice to consider a high-end heat pump with a rating of 13 HSPF or higher for the best performance. 

What Is an AFUE Rating? 

Annual Fuel Utilization Efficiency (AFUE) ratings are another measure of heating system efficiency, but they apply to furnaces and boilers. AFUE is a proportion of the annual heat output to the energy consumed during that period. The higher the AFUE rating, the more efficient the heating system. 

In 2023, the minimum AFUE rating for new gas furnaces was revised to 81. Previously, the south and southwest had a minimum of 80 AFUE, and the north required ratings of 90 AFUE or higher. Although there are no laws demanding that you install a system with ratings above the minimum, you’ll cut back on your heating bills by selecting a furnace rated 95 AFUE or higher. 

What Is an ENERGY STAR® Rating? 

The Environmental Protection Agency (EPA) launched the ENERGY STAR program in 1992 to help homeowners and businesses identify the most energy-efficient equipment and appliances available. HVAC equipment, appliances, water heaters, light fixtures, office equipment, electronics and building products that meet or exceed specific criteria can earn ENERGY STAR certification. 

ENERGY STAR-rated products go above and beyond the minimum requirements to save energy and cut down on emissions without sacrificing performance or features. You can also look for the ENERGY STAR Most Efficient designation, which recognizes the top performers in energy efficiency and innovation. The EPA is currently overhauling the qualification requirements in the wake of the new minimum HVAC efficiency standards. 

Install an Efficient HVAC System 

For help identifying which HVAC energy-efficiency rating is right for your budget, turn to Service Experts Heating & Air Conditioning. We can assess your situation and help you make an informed decision. Rest assured that we offer a range of products from today’s most popular brands, all of which meet or exceed the minimum efficiency requirements for 2023. We’re so confident you’ll be satisfied with our services that we give you a 100% satisfaction guarantee! For more information or to schedule a complimentary HVAC installation estimate, please contact a Service Experts office near you

Savings For You

See All Offers Here >

$50 OFF Any Repair

  • Save $50 on a Paid Service
  • Written 100% Satisfaction Guarantee
  • Plus, ask how to save an additional 15% and waive your trip charge!

Worry-Free Comfort for one Low Monthly Payment

© 2023 Service Experts, Service Experts Heating & Air Conditioning, and the Service Experts logo and design are registered trademarks of Service Experts LLC and used under license by SE Canada Inc. All Rights Reserved. *Not applicable to the Advantage Program. See your signed Advantage Program Agreement for full details and exclusions. 100% Satisfaction Guarantee is subject to certain restrictions and limitations as set forth in the applicable Terms and Conditions.