Your AC unit uses a chemical refrigerant to shift heat within your house outside. This makes your residence chilled and comfy. The model of refrigerant used in your home’s air conditioner has changed several times as time has passed, keeping in touch with technological advancements and environmental regards.
All updated home air conditioners use R410a, also referred to as Puron. But this refrigerant will subsequently be discontinued. This is due to a sustained attention on restricting compounds known to have an effect on the environment.
To learn the “why” that drives AC restrictions, it helps to put it into perspective. Two-thirds of the 128.5 million residences in the USA have air conditioning, according to the U.S. Department of Energy.
But it’s not so much the air conditioning system itself, or even its cooling performance.
The issue in question is the refrigerant these systems have to create the cooling we enjoy.
Installed after 2010
If your unit was put in after January 1, 2010, it probably runs on R410a. And there’s lots of time for you to prepare for the phaseout. So, it’s not a thing you should be bothered about now.
Strategies and timetables have been determined for commercial cooling units. But the starting point of the phaseout for residential air conditioning systems hasn’t yet been scheduled. However, the phaseout could commence around 2024 and take 10 years to complete.
By that time, you might need to install a new your equipment anyhow, as the ordinary life cycle for an air conditioning system is usually 15 years.
Installed Before 2010
This compound isn’t being produced right now, but there are still a lot of residential cooling systems that use R22. If you have to get service, it might be very expensive since only reclaimed and recycled refrigerant is attainable.
In many cases, we recommend installing a new your equipment due to the growing costs of keeping up an air conditioner with R22. In addition, you’ll be receiving a more energy-efficient solution.
Reach our Experts at 301-747-3140 right away and we’ll help you start finding an updated solution.
How Do I Determine What Type Refrigerant My AC Uses?
If you’re uncertain what type of refrigerant your air conditioning has, you can look at its plate. This piece is typically located on the outside condenser. Or you can find it in your owner’s manual.
If you still can’t locate it, call us at 301-747-3140 and our Experts can assist you.
Why are Refrigerants Detrimental to the Environment?
Older formulas of refrigerants can harm the environment and cause climate change. Here’s a glance at the history of residential air conditioner refrigerants:
- Residential air conditioners have used R22, or Freon, for a long time. Researchers found it was detrimental to the planet and ozone, so creation permanently stopped on January 1, 2020.
- R410a is the alternative for R22. It’s what you’ll find in all new air conditioners today.
What Should I Do in the Meantime?
If your AC is approaching (or older than) 15 years, now’s a great time to get started prepping for this purchase.
We get that replacing your system can be a big expense. That’s why we offer our exclusive Advantage Program™ in addition to financing, With our Advantage Program, you can receive a new, high-efficiency system for just one low monthly payment. And get maintenance, repairs and parts at no extra expense.*
Reach us at 301-747-3140 to set up an appointment right away. We’ll discuss your budget and needs to help you pick the right comfort system for your house.